The display comes with black, red, blue and green pens. Each pen has an attached eraser and an indicator light.
The display’s bottom frame includes magnetic holders for the pens. Removing a pen from its holder activates it, and you can use the pen to draw or erase digital ink. Replace the pen when you’re done using it to charge it.
When you first turn on the display or pick up a pen from the magnetic holder, the pen’s light turns on to indicate the pen’s status:
Light
Pen status
Action
Solid green
The pen is charging slowly and can be used for at least two hours.
Pick up the pen and use it to write on the display. Return the pen to the magnetic holder when you’re done.
Solid amber
The pen is charging quickly and can be used for less than two hours.
Use the pen for up to two hours. Return the pen to the magnetic holder when done.
Note
It is normal for pens to be warm to the touch when charging quickly.
Solid red
The pen needs to be charged within 30 minutes.
Finish using the pen and return it to the magnetic holder when done.
Flashing red
The pen needs to be charged within 10 minutes.
Return the pen to the magnetic holder as soon as possible.
Flashing green or amber (while the pen is in the magnetic holder)
The pen’s firmware is updating.
Wait for the light to stop flashing. This indicates the pen’s firmware has completed updating.
Caution
When you return a pen to the magnetic holder, make sure it’s centered in its holder to keep it from falling and being damaged. The pen’s light turns on to indicate that it’s properly positioned in the holder.
Important
Use only pens designed for SMART Board 7000 or 7000 Pro series interactive displays (see ).
After you install the display and turn it on for the first time, place the pens in the holders for at least five minutes. This pairs the pens with the display and charges them for testing purposes.
If you previously paired a pen with a SMART Board 7000 or 7000 Pro series interactive display, you must pair it with another display to use it with that display. When you do this, the pen’s firmware may be updated to align with the other display’s software.
To fully charge the pens, keep them in the holders for at least four hours before users start using the display.
With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of school smartboard.