Product Overview
BP 5/8 Bearing Plate
Bearing plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections.
The BP1/2-3 and BP5/8-3 are 3"x3" bearing plates that meet the latest requirements of the IRC and IBC. These plate washers are available uncoated or with a hot-dip galvanized (HDG) coating.
The BPS and LBPS are bearing plates that offer increased flexibility while meeting the latest requirements of the code for 2x4 and 2x6 walls. The slotted hole allows for adjustability to account for bolts that are not in the middle of the sill plate.
The BP5/8SKT uses SDS 1/4"x1 1/2" screws to provide lateral resistance when 5/8" diameter sill holes are overdrilled (screws are provided). The shear capacity of the connection and the sill/anchor bolt shall be determined by the Designer for each installation.
Material
See product table
Finish
LBP, LBPSGalvanized; BP7/8-2, BP5/8SZinc Plated; BPS, BPNone. BPs and BPSs may be ordered HDG; LBP and LBPS products may be ordered ZMAX; contact Simpson Strong-Tie. See Corrosion Information.
Installation
See General Notes.
BP/BPSFor shearwall applications, position edge of plate washer within 1/2" of sheathed edge of sill plate.
Codes
See Code Reports. 2012 IRC R602.11.1, 2008 SDPWS 4.3.6.4.3 (See model table footnotes.)
With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of Bearing Plate Washers.