In The Rainy Season, Is The Motor Of Centrifugal Pump Wearing A Hat?

The protection of outdoor motor of centrifugal water pump is mainly based on structure protection to prevent the invasion of small animals and rain, snow, wind and sand. The advantages and disadvantages of shell sealing degree lie in the treatment of shaft extension and outlet. The bearing part of outdoor motor centrifugal water pump shall be equipped with water throw ring, the joint surface between junction box and base shall be wide and flat, and the sealing gasket shall be set between them. The incoming line shall be provided with sealing sleeve, the end cover stop and ring hole shall be provided with rubber gasket, and the fastening screw shall be sealed with countersunk screw. Outdoor motor centrifugal water pump  ventilation should be taken to prevent wind and snow or foreign objects into the structure. A ventilation pipe can be used or a baffle can be set in the air duct to separate rain, snow and sand. Dust filters can be added in dusty areas.

For the vertical installation of protective outdoor motor centrifugal water pump , on the one hand, it is necessary to ensure the ventilation and heat dissipation of the motor, that is, it is necessary to install the fan and hood, but there will be ventilation holes on the hood. In order to prevent the rain from entering the motor centrifugal water pump  in rainy weather, we will add a rain cap above the hood, so as to prevent the direct invasion of rain.

This rainproof measure is like taking an umbrella on a rainy day. In more cases, the rainproof cap and the hood are welded together by welding, which not only does not interfere with the ventilation and heat dissipation of the motor centrifugal water pump , but also plays a necessary protective role, and does not lose the overall aesthetic feeling of the motor centrifugal water pump .

If the rain cap is missing or missing, is that ok? When it doesn't rain, you can eat hot pot.haha