sintered diamond blades factory
Sintered saws are designed to ensure that the cutting surface is optimally sharp at all times. Sintered saws sharpen themselves during cutting by continuously exposing new layers of diamond.
They are very long lasting compared to notched diamond blades.
These saw blades are steel core. The strength of steel gives you a thin kerf (thickness of cut) so you don't waste a lot of precious material.
The blades will rust if left standing in water for an extended period of time. If you choose to leave your blades in water over night we recommend adding a rust inhibitor to your water.
We can also supply a saw blade bush to fit various size shafts, however due to the large number of different machines it is best to check with us first. You need to let us know at the time of ordering otherwise a postage and handling charge will apply.
ADVISE YOUR BUSH SIZE IN THE "CUSTOMER INSTRUCTIONS" BOX AT THE CHECKOUT
If the blade seems to slow down in cutting, you can take an old corundum grinding wheel 100 or 80 grit, slice into this a few times, and you once again have a clean smooth cutting blade.
We also stock aluminium oxide dressing sticks for sharpening diamond saw blades and wheels.